Anmol Chemicals is the pioneer manufacturers of Lithium Citrate, Pharmaceutical Excipients Fragrance Food & Flavor chemicals in India. We offer Halal and Kosher Lithium Citrate made in an ISO9001, ISO22000 (FSSC22000) cGMP and GLP certified facility. Our group has several manufacturing facilities spread across the world, supported by toll manufacturers and representatives in UAE, Europe, USA, China and has several associated manufacturing facilities spread across India. All the Information on Physics, Chemistry, Applications, Uses and Technology on Manufacture of Lithium Citrate is in these pages.

The units have one or more of the certifications like FDA GMP, ISO 9001, ISO 22000, HACCP, REACH, Kosher & Halal

----------

Lithium Citrate USP and BP Grade Manufacturers

Lithium Citrate USP Grade
C6H5Li3O7.4H2O 281.98
1,2,3-Propanetricarboxylic acid, 2-hydroxy-trilithium salt tetrahydrate.
Trilithium citrate tetrahydrate [CAS Number 6080-58-6].
Anhydrous 209.93 [CAS Number 919-16-4].
Lithium Citrate contains not less than 98.0 percent and not more than 102.0 percent of C6H5Li3O7, calculated on the anhydrous basis.

Identification:
A: When moistened with hydrochloric acid, it imparts an intense crimson color to a nonluminous flame.
B: It responds to the test for Citrate.
pH: between 7.0 and 10.0, in a solution (1 in 20).
Water: Dry it at 150 for 3 hours: it loses between 24.0% and 28.0% of its weight.
Carbonate: Add about 0.5 g to 5 mL of 6 N acetic acid: not more than a slight effervescence is produced.
Heavy metals: the limit is 0.001%.

---

Lithium Citrate BP Grade
Ph Eur
C6H5Li3O7,4H2O --- 282.0 --- 6080-58-6

DEFINITION
Trilithium 2-hydroxypropane-1,2,3-tricarboxylate tetrahydrate.
Content: 98.0 per cent to 102.0 per cent (anhydrous substance).

CHARACTERS
Appearance: White or almost white, fine crystalline powder.
Solubility: Freely soluble in water, slightly soluble in ethanol (96 per cent).

IDENTIFICATION
A. When moistened with hydrochloric acid, it gives a red colour to a non-luminous flame.
B. Dilute 3 ml of solution S (see Tests) to 10 ml with water. Add 3 ml of potassium ferriperiodate solution. A white or yellowish-white precipitate is formed.
C. To 1 ml of solution S add 4 ml of water. The solution gives the reaction of citrates.

TESTS
Solution S: Dissolve 10.0 g in carbon dioxide-free water prepared from distilled water and dilute to 100 ml with the same solvent.
Appearance of solution: Solution S is clear and colourless.
Acidity or alkalinity: To 10 ml of solution S add 0.1 ml of phenolphthalein solution. Not more than 0.2 ml of 0.1 M hydrochloric acid or 0.1 M sodium hydroxide is required to change the colour of the indicator.
Readily carbonisable substances: To 0.20 g of the powdered substance to be examined add 10 ml of sulphuric acid and heat in a water-bath at 90 ± 1C for 60 min. Cool rapidly. The solution is not more intensely coloured than reference.
Chlorides: Maximum 100 ppm.
Oxalates: Maximum 300 ppm, calculated as anhydrous oxalate ion.
Sulphates: Maximum 500 ppm.
Heavy metals: Maximum 10 ppm.
Water: 24.0 per cent to 27.0 per cent, determined on 0.100 g.

Lithium Citrate Manufacturers

Anmol Chemicals
S-8, SARIFA MANSION, 2ND FLANK ROAD, CHINCHBUNDER, MUMBAI 400009, INDIA
TEL: (OFFICE) 91-22-23770100, 23726950, 23774610, 23723564. FAX: 91-22-23728264

e-mail: anmolc@mtnl.net.in

Exports to USA, Canada, UAE, Dubai, South Africa, Tanzania, Kenya, Nigeria, Egypt, Uganda, Turkey, Mexico, Brazil, Chile, Argentina, Europe Netherlands, Italy, Spain, Germany, Portugal, France, Malaysia, Indonesia, Thailand, Vietnam, Korea, Japan, etc.

Copyright and Usual Disclaimer is Applicable. 13 January, 2022